ABB ACS 400 User Manual page 106

Code Description
4007 ACT1 INPUT SEL
Source for actual value 1 (
1 = AI 1
Analogue input 1 is used as actual value 1.
2 = AI 2
Analogue input 2 is used as actual value 1.
4008 ACT2 INPUT SEL
Source for actual value 2 (
1 = AI 1
Analogue input 1 is used as actual value 2.
2 = AI 2
Analogue input 2 is used as actual value 2.
4009 ACT1 MINIMUM
Minimum value for actual value 1 (
minimum and maximum settings.
4010 ACT1 MAXIMUM
Maximum value for actual value 1 (
input minimum and maximum settings.
4011 ACT2 MINIMUM
Minimum value for actual value 2 (
4012 ACT2 MAXIMUM
Maximum value for actual value 2 (
Figure 54 Actual value scaling. The range of the analogue input signal is set by parameters 1301
and 1302 or parameters 1304 and 1305, depending on the analogue input used.
96
1).
ACT
2).
ACT
1). Refer to Figure 54 and to Group 13 parameters for analogue input
ACT
1). Refer to Figure 54 and to Group 13 parameters for analogue
ACT
2). Refer to parameter 4009.
ACT
2). Refer to parameter 4010.
ACT
1 (%)
ACT
1
ACT MAXIMUM
1
ACT MINIMUM
AI min
A 1 (%)
CT
1
ACT MINIMUM
1
ACT MAXIMUM
AI min
AI max
AI max
Analogue input signal
Analogue input signal
ACS 400 User's Manual