Panasonic KX-NS1000 Installation Manual page 230

5.8.1 Assigning IP Addressing Information
KX-NT265 (Software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
VOL
Press VOLUME to
select "Network".
IP Address*
To set the subnet mask address
VOL
Press VOLUME to
select "Subnet Mask".
To set the default gateway address
VOL
Press VOLUME to
select "Default GW".
To enter the IP address of the PBX
HOLD
Press HOLD
twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
230 Installation Manual
PROG.
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
VOL
Press VOLUME Press SP-PHONE
to select "PBX". twice.
The IP-PT will reboot
and can then be
registered to the PBX.
VOL
Press SP-PHONE
twice.
2
3
PBX IP
Address
Press
SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
HOLD
Press HOLD
to return to the
Menu screen.