Slc2/Pri30 Card (Kx-Ns0290Ce) - Panasonic KX-NS1000 Installation Manual

4.5.3 SLC2/PRI30 Card (KX-NS0290CE)

4.5.3 SLC2/PRI30 Card (KX-NS0290CE)
Function
A combination card including:
•
1 ISDN Primary Rate Interface port (30B channels).
•
2 extension ports with Caller ID (FSK) for SLTs.
EURO-ISDN/ETSI compliant.
To SLT
To NT1/ Extension
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1, Screws ´ 4
User-supplied (not included): RJ45 connector, Twisted pair cable
CAUTION
•
When connecting this optional service card to the trunk, connect through an NT1; do not connect to
the U interface of the trunk directly.
•
PRI ports are SELV ports and should only be connected to SELV services.
Notice
•
When connecting the RJ45 connector, attach the included ferrite core. Refer to "4.2.8 Attaching a
Ferrite Core".
•
The cable to connect to the ISDN Primary Rate Interface port of the SLC2/PRI30 card should be
CAT 5 (Category 5) or higher.
Note
•
In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
•
This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "4.13 Starting the
KX-NS1000".
Switch Settings
Switch
A/B
144 Installation Manual
RJ45
LEDs LEDs
Type Usage and Status Definition
Slide Select A (default) for trunk or B for extension use.
B A