Panasonic KX-NS1000 Installation Manual page 257

For Non-KX-UT Series SIP Phones
After connecting non-KX-UT series SIP phones to the PBX over a network, register those IP terminals to the
PBX manually.
Follow the procedure below for registration.
1. a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b. Click Virtual ® V-SIPEXT32.
c.
Move the mouse pointer over the V-SIPEXT32 card
(Virtual 32-Channel SIP Extension Card).
A menu will be shown under the mouse pointer.
d.
Click Port Property.
2. Assign extension numbers to the SIP extensions.
•
If the Automatic Extension Number Set for Extension
Card feature is enabled, the extension numbers of
SIP extension are automatically assigned. To
programme this feature, refer to "9.32 PBX
Configuration—[1-3] Configuration—Option—
New Card Installation—Automatic Extension
Number Set for Extension Card" in the PC
Programming Manual.
•
If not, enter the extension number for each SIP
extension manually.
5.9.1 Registering IP Telephones
Installation Manual 257