Panasonic KX-NS1000 Installation Manual page 217

KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT551)
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
Select "PBX".
ENTER
To enter the IP address of the Secondary PBX
(optional for KX-NT300 series [Software version 2.00 or later only] and
KX-NT500 series [Software version 1.00 or later only])
Select "Secondary PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
Return to the
Menu screen.
Note
The illustrations may differ from the buttons on your telephone.
For KX-NT300 series: Software version 2.00 or later only
For KX-NT500 series: Software version 1.00 or later only
ENTER Select "PBX IP Address".
PBX IP Address
ENTER
STORE
Press "STORE".
5.8.1 Assigning IP Addressing Information
SETUP
Press "SETUP"
when it is displayed.
ENTER
ENTER
PBX IP Address
The IP-PT will reboot
and can then be
registered to the PBX.
Select "Primary PBX".
ENTER
Installation Manual 217