Panasonic KX-NS1000 Installation Manual page 241

KX-NT551
After assigning
the IP addresses
Select "Enable" for
LLDP setting.
To set the VLAN ID for the primary port
Select "LLDP (Primary)".
Select "Priority".
To set the VLAN ID for the secondary port
Select "LLDP (Secondary)".
Select "Priority".
To set the Interval time for LLDP
Select "LLDP (Secondary)".
INTERVAL
1–3600
To end programming
Press HOLD three
times to return to the
Menu screen.
The VLAN ID and the VLAN priority are set automatically for the primary port; these are reference only. However, the VLAN ID and
*1
the VLAN priority for secondary port must be set manually.
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
*2
Select "QoS". Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Select "VLAN ID".
VLAN Priority *1*2
0–7
Press SP-PHONE. Select "VLAN ID".
VLAN Priority *1*2
0–7
Press SP-PHONE.
Press SP-PHONE.
Press STORE.
Select "LLDP".
VLAN ID
0–4094
VLAN ID
0–4094
Press SP-PHONE.
Select Press SP-PHONE.
"LLDP (Interval)".
The IP-PT will reboot
and can then be
registered to the PBX.
5.8.3 Setting LLDP Parameters
Press SP-PHONE.
*1
*1
Press SP-PHONE.
Installation Manual 241