Cabling The Storage System; I/O Modules - HP StoreEasy 1000 Administrator's Manual

If you ordered the HP Tower to Rack Conversion Tray Universal Kit for the purpose of installing the
1530 tower model in a rack, use the provided tower-to-rack conversion kit installation instructions
to install the tower hardware into the rack.

Cabling the storage system

The StoreEasy systems support both single domain and dual domain cabling using D2000 and
D6000 disk enclosures, depending on the SmartArray RAID controller that is installed in the system.
See Table 2 (page 22)
using a single data path, to the SmartArray RAID controller in the StoreEasy system. In a dual
domain, external disk enclosures are connected, using two data paths, to a single SmartArray
RAID controller in the StoreEasy system. For more detailed information about single and dual
domains, see the technology brief entitled, "Redundancy in enterprise storage networks using
dual-domain SAS configurations" located at:
public/kb/docDisplay/?docId=c01451 157
Table 2 Controller, disk enclosure, and single/dual domain support
Controller model
P222
P421
P822
P700m series

I/O modules

The StoreEasy systems connect to the I/O modules on the D6000 and D2000 disk enclosures.
Figure 19 (page 22)
23) shows the I/O module ports on the D2700 disk enclosure, and
the I/O module ports on the D6000 disk enclosure.
Figure 19 HP D2600 Disk Enclosure I/O module ports
1. Port 1
2. Port 2
3. I/O module A
4. I/O module B
22 Installing and configuring the storage system
for details. In a single domain, external disk enclosures are connected,
Supported in Disk enclosure
StoreEasy systems supported
1430, 1530 D2000
1430 D2000, D6000
1430, 1630, 1830 D2000, D6000
N
shows the I/O module ports on the D2600 disk enclosure,
http://h20565.www2.hp.com/portal/site/hpsc/
.
Single domain support
Y
Y
Y
Y
Dual domain support
N
N
Y
Y
Figure 20 (page
Figure 21 (page 23) shows