Multisymbol Separator - Microscan Quadrus EZ Reader User Manual

Multisymbol

Multisymbol Separator

Usage: Used to delimit or separate data fields with a user defined character.
Any valid ASCII character, inserted between each symbol read when Multisymbol
Definition:
is set to any number greater than 1.
<K222,number of
Note: If Multisymbol Separator has been changed to any other character
Serial Cmd:
than the default comma and you wish to re-define the separator as a
comma, use ESP or the embedded menus.
Default: , (comma)
Options: Any available ASCII character, except
Note: If a NULL is entered for the multisymbol separator, the multisymbol separator output
will be disabled.
Note: If noread messages are disabled and there are noreads occurring, separators will
only be inserted between symbol data outputs.
3-6
symbols,multisymbol separator>
< or > (if used as delimiters).
Quadrus EZ Reader User's Manual