Separator Character (Upc/Ean); Supplementals Type (Upc/Ean) - Microscan Quadrus EZ Reader User Manual

Separator Character (UPC/EAN)

Note: If Separator Character has been changed to any other character and you wish to
re-define the separator as a comma, you will need to use ESP or the embedded menu.
Usage: As required by the application.
Allows the user to change the separator character from a comma to a new
Definition:
character.
<K473,UPC status,EAN status,supplementals status,separator status,
Serial Cmd:
separator
Default: , (comma)
Options: Any ASCII character
Note: Whenever Separator Character is defined as a comma (,) sending a <K473,s?>
command will return the current settings including the separator character comma which
appears after the separator status comma.

Supplementals Type (UPC/EAN)

Usage: As required by symbology used in application.
Definition: Allows the user to select 2 character or 5 character supplements, or both.
<K473,UPC status,EAN status,supplementals status,separator status,
Serial Cmd:
separator
Default: Both
Options: 0 = Both
Both
Either 2 character or 5 character supplementals will be considered valid.
2 Characters Only
Only two character supplementals will be considered valid.
5 Characters Only
Only five character supplementals will be considered valid.
Quadrus EZ Reader User's Manual
character,supplemental type>
character,supplemental
1 = 2 char only
type>
2 = 5 char only
Symbologies
4-19