Configure Radio - Texecom Premier 24 Installation Manual

Premier 24 Installation Manual

Configure Radio

YES to Select:-
Engineer Utils
Yes
Engineer Utils
View Event Log
Engineer Utils
Configure Radio
Yes
01: ID000000 OK
SL:000 Zone 00
??
23: ID000000 OK
SL:000 Zone 00
Yes
23: ID...... TAMP
Activate Device
Activate the Tamper
on the Device or press
Dissarm on the FOB
23: ID242900 OK
SL:085 Zone 00
No
23: ID242900 OK
SL:085 Zone>00
??
23: ID242900 OK
SL:085 Zone>14
Yes
23: ID242900 OK
SL:085 Zone 14
Menu
The Intelligent Radio Receiver or Network Receiver
provide the facility to use wireless detection devices and
Fobs. Up to 32 wireless devices can be connected,
including upto 24 detection devices and up to 16 fobs
(combined total cannot exceed 32 devices).
Wireless devices can then be mapped on to the system
along with conventional detectors.
The top line on the display shows the serial number of the
device and also the status i.e. Active, Tamper etc.
The bottom line of the display shows the signal strength
and also which zone/user the device is mapped to.
!
Signal strength should be greater than 30.
The signal range is between 0 and 90.
See Radio-Plus installation manual for full details
INS248
Use keys 0 - 9 to enter the
required device number or
use the SCROLL key to search
e.g. 23 = Device 23
Press YES to learn
Radio Device
Press NO to map the
device to a zone/user
Use keys 0 - 9 to enter the
required zone/user number or
use the SCROLL key to search
e.g. 14 = Zone 14
Top Line = Serial number
and status of device
Bottom Line = Signal strength
and zone/user number
Programming the Control Panel
83