Digi Options - Texecom Premier 24 Installation Manual

The Programming Menu

Digi Options

H73!:0!3$-$6:TU
VBGWB595!@D:508<
Yes
VBGWB595!@D:508<
;$<$:!B595
4
ghi
VBGWB595!@D:508<
B595!@D:508<
Yes
B595!@D:508<
!M!M!M!M!M!M
No
B595!5<!78(I-$E
\M!M!M!M!M!M
O-58E!B5(--589
!M!M!M\M!M!M!
No
O-58E!B5(--589
!M!M!M\O!M!M!
Yes
64
Press NO to edit
the Digi option
Use keys 1 - 8 to select
an option or use the
SCROLL key to search
Press NO to
select/deselect
the option
There are 5 options that control how the plug-on
igimodem works.
Select options by pressing keys 1 to 8 (a letter on the
display means the option is selected, a star on the display
means the option is not selected).
E – Digi is Enabled (Default = OFF)
The plug-on igimodem will report all system events to the
Alarm Receiving Centre.
P – Pulse Dialling (Default = OFF)
The plug-on igimodem will always dial telephone
numbers using pulse dialling.
3 – Pulse After 3 (Default = OFF)
The plug-on igimodem will always dial telephone
numbers using tone dialling. However, if the Digimodem
fails to dial the number three times in a row, it will revert to
pulse dialling for the remaining attempts.
B – Blind Dialling (Default = OFF)
The plug-on igimodem will not look for a dial tone before
dialling a telephone number.
R – Reserved (Default = OFF)
This option is not used.
A – Dial All Numbers (Default = OFF)
The igimodem will
acknowledgement has
programmed telephone numbers.
Premier 24 Installation Manual
not shut down until
been received from
INS248
an
all