Speaker Tones - Texecom Premier 24 Installation Manual

Premier 24 Installation Manual
5 - Banner Message
This 16-character message is displayed above the time and
date whenever the control panel is unarmed or fully armed.
!
Default = '
6 - Part Arm Banner
This 16-character message is displayed above the time and
date whenever the control panel is part armed.
!
Default = * PART ARMED *
7 - Printer Header
This 16-character header will be printed whenever a log
printout is taken from the control panel or a Short Message
Service (SMS) text message is sent to a mobile phone.
!
Default = 'Printer Header'
8 - Part Arm 1
This 16-character message is displayed above the time and
date whenever the control panel is unarmed or fully armed.
!
Default = Evening Arm
9 - Part Arm 2
This 16-character message is displayed above the time and
date whenever the control panel is unarmed or fully armed.
!
Default = Bedtime Arm 1
10 - Part Arm 3
This 16-character message is displayed above the time and
date whenever the control panel is unarmed or fully armed.
!
Default = Bedtime Arm 2
INS248
' (Not Defined).

Speaker Tones

H73!:0!3$-$6:TU
X08$!3$:#D
3
def
H73!:0!3$-$6:TU
Y-0I(-!@D:508<
Yes
Y-0I(-!@D:508<
3=<:$/!"5/$)<
8
tuv
Y-0I(-!@D:508<
3D$(?$)!"08$<
Yes
3D$(?$)!<0#8E<
25)$!"08$<!!\!@8
3D$(?$)!<0#8E<
78:)=!"08$<!\!@8
No
3D$(?$)!<0#8E<
78:)=!"08$<!\@AA
Yes
The speaker output on the control panel can be
programmed so that certain types of tones are not
generated. When deselected, Fire, Alarms, Fault, Service,
Entry, Exit and Chime tones will not be heard.
Select tones by pressing keys 1 to 8 (a letter on the display
means the tone is selected, a star on the display means the
tone is not selected).
F - Fire Tones On (Default = ON)
Fire alarm tones will be generated.
A - Alarm Tones On (Default = ON)
Intruder alarm, Tamper alarm and PA alarm tones will be
generated.
F - Fault Tones On (Default = ON)
Fault tones will be generated.
S - Service Tone On (Default = ON)
Service and Warning tones will be generated.
E - Entry Tones On (Default = ON)
Entry tones will be generated.
X - Exit Tones On (Default = ON)
Exit tones will be generated.
C - Chime Tones On (Default = ON)
Chime 1 and 2 tones will be generated.
Programming the Control Panel
Use the SCROLL key to
select the sounder option
Press No to change
the sounder option
49