Change Eng. Code; View Id Status; Print Log - Texecom Premier 24 Installation Manual

Programming the Control Panel

Change Eng. Code

H73!:0!3$-$6:TU
78958$$)!V:5-<
Yes
78958$$)!V:5-<
R5$F!74$8:!G09
78958$$)!V:5-<
,L(89$!7891!,0E$
Yes
V<$)!%%!,0E$!
!!!!!UUUUUU
????
V<$)!%%!,0E$
!!!!!UU+c_b
Yes
This option allows the Engineer code (User 00) to be
changed. This code can be 4, 5 or 6 digits in length. The
system will allow a mixture of different length User codes.

View iD Status

YES to Select:-
Engineer Utils
Yes
Engineer Utils
View Event Log
Engineer Utils
View iD Status
Yes
................
...............N
Area
................
...............M
Menu
This option allows the current status of all iD devices to be
viewed on a single screen.
82
Enter User code number
4, 5 or 6 digits long
Zone Status
Zones 1-16
................
...............N
Zones 17-24 Scan Mode
N=Normal
Zone Status
M=Midrail
1=Healthy
0=Active
. =Tamper or not Present
Use AREA key to switch
from Normal loop scan to
Midrail scan and the NO
key to switch back

Print Log

YES to Select:-
Engineer Utils
Yes
Engineer Utils
View Event Log
Engineer Utils
Print Log
Yes
Print Log
> 050 <
Print Log
> 150 <
Yes
This option allows up to 250 events to be printed to a serial
printer connected to com port 1.
Premier 24 Installation Manual
Enter number of events to print
(Maximum 250)
Press YES to start
INS248