View Id Data; Configure Radio - Texecom Premier 48 Installation Manual
Security control panels
Hide thumbs
Also See for Premier 48:
- Installation manual (104 pages) ,
- Quick reference manual (16 pages) ,
- Master user manual (64 pages)
Table of Contents
Advertisement
Premier 48, 88, 168 & 640 Installation Manual
View iD Data
Yes
Yes
0
AREA
No
????
Omit
Menu
Menu
Viewing the iD Data
This option allows the 60IXD expander the iD biscuit data to
be viewed to diagnostic purposes. There are two way of
viewing the data from the expander:
Normal Scan Mode
This is the normal operation mode of the expander and the
data being displayed is the average result of 4 successive
scans of the iD loop.
Quick Scan Mode
In this mode the data being displayed is the result of each
scan of the iD loop. This mode is useful for identifying
problems with biscuits due to interference, high resistance
connections etc.
"iD" is a registered trade mark of Chloride Safety System Limited.
INS176
Press
0
to toggle between
iD Loop
1
and
2
The status of the zones
will be displayed
Press
Area
to toggle
between ormal loop scan
N
Q
uick loop scan and
Biscuit Mapping
Press
0
to toggle between
iD Loop
1
and
2.
Use
Scroll
keys to select the
required iD biscuit.
Press
No
to edit
the zone mapping and
wiring options.
Use keys 0 - 9 to enter
the zone number
Press
Omit
to toggle between
Normally Open and Normally
Closed wiring.
* = Normally Open.
Configure Radio
Yes
Yes
??
Yes
Activate the Tamper
on the Device
No
???
Yes
Menu
Configuring Radio devices
Up to 32 wireless detectors and up to the maximum number
of users in remote FOBS can be leant on to the system.
Wireless devices can then be mapped on to the system along
with conventional detectors.
The top line on the display shows the serial number of the
device and also the status i.e. Active, Tamper etc.
The bottom line of the display shows the signal strength and
also which zone/user the device is mapped to.
Signal strength should be greater than 30.
The signal range is between 0 and 90
See Radio-Plus installation manual for full details.
Programming the Control Panel
Use keys 0 - 9 to enter the
required device number or
use the SCROLL key to search
e.g. 23 = Device 23
Press YES to learn
Radio Device
Press NO to map the
device to a zone/user
Use keys 0 - 9 to enter the
required zone/user number or
use the SCROLL key to search
e.g. 64 = Zone 64
Top Line = Serial number
and status
of device
Bottom
Line = Signal strength
and zone/user number
97
Hide quick links:
Advertisement
Table of Contents
