Setting up your plotter
Task 6: (Optional) Change the language
Task 6: (Optional) Change the language
All the plotter's internal plots are available in the following languages: English,
French, Italian, German, Spanish, Portuguese and Japanese. By default, the
language is English. If English is what you want, then you can skip this task and
go to task 7.
To change from English to any of the other languages, you must use the plotter's
Setup Sheet, as explained below.
1
Load a sheet of A-size or A4-size plain paper, in portrait orientation. For
guidance on loading a sheet, see page 2–9.
When the
light is on, you have loaded the sheet correctly.
Ready
Plot will be on underside.
1–14
1750