Broker Call: Switching Between Two Calls; Joining Multiple People In A Conference - iPECS LIP-7008D User Manual

LIP-7008D
5.3

Broker Call: Switching between two calls

You may switch between the active call and a call on Hold, placing the
active call on Hold acting as a broker between two or more parties,
Broker Call. iPECS Phone users may 'broker' for multiple calls up to the
number of CO/IP line buttons.
OPERATION
To switch between two calls, Broker Call:
• Press the desired CO/IP line button.
5.4

Joining Multiple People in a Conference

You can establish a Conference with up to 3 parties, or 24 parties when
using a Multi-Party Conference Interface Module (MCIM). The other
parties in the Conference may be internal or external.
A Conference can be placed on Hold and is subject to
You may also use the Conference operation to join 2 external parties in a
private conversation. This is an Unsupervised Conference, which is
not subject to the normal Hold Recall operation.
A Flex button is required.
CONF
OPERATION
To establish a Conference:
• Establish call with one of the desired conference parties, and press
the
CONF
• Establish call with another conference party, and press the
button when connected (repeat as needed to add more parties),
• Press
CONF
To place a Conference on Hold:
• Press the
To retrieve the Conference from Hold:
• Press
CONF
To establish an Unsupervised Conference:
• Establish conference with two external parties,
• Press
CONF
To retrieve an Unsupervised Conference:
• Press
CONF
button when connected,
again to establish the conference.
/ button; the
HOLD SAVE
.
.
.
button LED will flash.
CONF
22
User Guide
Hold Recall.
CONF