Remote System Access; Direct Inward System Access (Disa); Mobile Phone Extension - iPECS LIP-7008D User Manual

LIP-7008D

7. Remote System Access

7.1

Direct Inward System Access (DISA)

DISA (Direct Inward System Access) allows remote users to gain
access to the system's resources. The system will recognize remote
user dialed inputs (call other stations, place calls over CO/IP lines,
review voice mails, etc). Remote users may be required to enter an
Authorization
OPERATION
To access system resources remotely:
• Call the system's DISA facility,
• Dial your authorization code (station number and password),
• Dial as needed for the desired system resource.
7.2

Mobile Phone Extension

When away from your desk or office you can place and receive iPECS
calls on a registered mobile phone. You may need to activate the Mobile
Phone Extension feature and assign the Mobile Phone number.
This feature is effective only through an ISDN CO line.
OPERATION
To register a mobile phone number:
• Press the
• Dial 37,
• Dial the mobile phone number,
• Press the
To activate a registered mobile phone from the user's station:
• Press the
• Dial 38,
• 1 to activate, 0 to deactivate,
• Press the
To place a call from the mobile extension using the iPECS:
• Dial the ISDN DID number of the station, the system will check the
CLID, answer the call and the user will receive intercom dial tone,
• Place internal or external iPECS call as normal.
Code.
/ button,
TRANS PGM
/
button.
HOLD SAVE
/ button,
TRANS PGM
/
button.
HOLD SAVE
29
User Guide