Forwarding Callers To A Text Message - iPECS LIP-7008D User Manual

LIP-7008D
• Dial 0 (Remote Call Forward code),
• Dial your Authorization Code (Station number & Password),
• Dial the 'type of forward' code 1-4,
• Press
SPEED
• Dial Speed Dial bin number,
• Replace the handset, return to idle.
To activate Call Forward, Off Premise (forward to an external number)
from a remote location:
Lift the handset,
•
• Dial the telephone number of a DISA assigned CO line,
• While receiving dial-tone, dial the Call Forward feature code 554,
• Enter your Authorization Code (Station & Password),
• Dial the 'type of forward' code 6-9,
Dial Speed Dial bin number,
•
• Replace the handset, return to idle.

3.8.3 Forwarding callers to a Text Message

Using an iPECS Phone, the system can be setup to return a 'Text
Message' to internal callers. When calling your Station, Internal callers
will automatically receive the selected message or you can send a text
message you select in response to an internal call, Silent Text Message.
There are 11 Custom Display Messages each up to 24 characters.
Ten assigned by the Attendant and one assigned by you, see
Speed Dial Character entry
In addition, there are ten fix Pre-defined Text Messages; some allow
auxiliary input for time, date, etc. (as shown in message list).
Message 01: LUNCH RETURN AT hh:mm
Message 02: ON VACATION
Message 03: OUT OF OFFICE
Message 04: OUT OF OFFICE
Message 05: OUT OF OFFICE
Message 06: CALL (enter up to 17 digits)
Message 07: IN OFFICE STA xxxx
Message 08: IN MEETING
Message 09: AT HOME
Message 10: AT BRANCH OFFICE
,
chart.
RETURN AT DATE mm:dd
RETURN AT TIME hh:mm
RETURN AT DATE mm:dd
RETURN UNKNOWN
RETURN AT TIME hh:mm
10
User Guide
Station