Using System Speed Dial Numbers; Using And Entering Station Speed Dial Numbers - iPECS LIP-7008D User Manual

LIP-7008D

4.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800 System Speed
Dial numbers (bins 200-999). The iPECS-300 & 600 systems each have
memory allocated for 3000 System Speed Dial numbers (bins 2000-
4999). You may, if allowed, use the System Speed Dial to dial
frequently called numbers.
In some cases, these numbers are divided into groups called System
Speed Zone Groups. In this case, you may access some numbers and
not others and your dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
OPERATION
To place a call using System Speed Dial:
• Lift the handset, or press the
• Press
Speed
• Dial the desired System Speed Dial bin number (200-999 for iPECS-
100, 2000-4999 for iPECS-300 & 600).

4.3.4 Using and Entering Station Speed Dial Numbers

Each station in the iPECS-100 is allocated memory for 20 Station
Speed Dial numbers (bins 00-19) each up to 48 digits. The iPECS-300
& 600 support 100 Station Speed Dial numbers (bins 000-099). These
numbers are entered at the user's station and may include several
'special' instructions. Special instructions and the corresponding button
are:
'#' – Pause, system will momentarily stop dialing.
F
LASH
FLASH
line.
CALL BACK
message.
'*' as 1
displayed when used.
'*' not as 1
will switch from pulse to DTMF dialing.
When entering a Speed Dial, a 16-character name, may be associated
with the number for
keystrokes as in the chart below.
,
st
as 1 digit – activate dial tone detect.
st
not as 1 digit – the system will generate a
st
as 1 digit – Send digits as
st
digit - Display Security, the stored number will not be
st
digit, - Dial Pulse to Tone Switchover, the system
Dial by
button,
Speaker
Name. Characters are entered with two
18
User Guide
flash on the CO
ISDN Keypad Facility