Table of Contents
Advertisement
2-4 Starting Printing
Getting Ready to Receive Data from a Computer
When you have finished loading media and making the temperature settings for the media heating system, then follow
the steps below. This procedure enables the machine to receive data from the computer and perform printing.
Procedure
Close the front cover.
Press
Wait until
Make sure you are at the top menu.
If you are not at the top menu, press
Printing Is Not Possible in These Situations
The machine does not run when the front cover is open. Also, never open it when printing is in progress. Doing so
interrupts printing.
Data from the computer is not accepted when
does not light up when media is loaded incorrectly.
Printing does not start until
Data from the computer is not accepted when you are not at the top menu.
50
Chapter 2 Operation
(making the light come on).
stops flashing and stays steadily lit.
Top menu
W 2600 mm
Flashing
Steadily lighted
lights up.
, then press
.
is dark.
Steadily lighted
Advertisement
Table of Contents
