The Power-Saving Feature - Roland AJ-1000 User Manual

The Power-saving Feature

This machine is provided with a power-saving feature that switches to a low-power "sleep mode" when a fixed interval
passes with no operation. The factory default for the time after which the machine switches to the sleep mode is 30
minutes.
You can change the setting for the time of the shift to the sleep mode. You can also switch off the power-saving feature.
p 93 "Setting the Interval until Activation of the Sleep Mode"
p 93 "Deactivating the Sleep Mode"
When the machine is in the sleep mode, the sub power switch flashes slowly and the media heating system stops.
Using the control panel or performing operations such as sending printing data from the computer (when media is
loaded) restore the machine to its normal mode.
To reduce power consumption and prevent problems such as overheating, we recommend leaving the power-saving
feature on and setting the activation time for the sleep mode to 30 minutes or less.
2-1 Switching the Power On and Off
Chapter 2 Operation 31