3.
Enter the correction values that you read.
Enter the corresponding correction values for H1 through H6.
DETAIL SETTING
SETTING
H1
H2
H3
0
0
0
H4
H5
H6
0
0
0
4.
Go back to the original screen.
W 2600 mm
Description
This corrects, for each head, the minute misalignment that occurs in the bidirectional-printing mode. When further
correction is required, such as when adjustment made using [SIMPLE SETTING] do not enhance printing, use [DETAIL
SETTING] to make corrections for each head.
4-4 Optimizing Printing to Match Media Thickness
Press
.
Press
.
Use
to select.
Use
to set the correction values.
Press
to enable the setting.
Press
.
Press
to go back to the original screen.
Chapter 4 Feature Reference
85