Changing The Menu Language And The Units Of Measurement; Drying The Trailing Edge Of The Printing Area On The Dryer - Roland AJ-1000 User Manual

4-6 Changing How the Printer Operates

Changing the Menu Language and the Units of Measurement

Procedure
MENU LANGUAGE
ENGLISH
LENGTH UNIT
mm
TEMP. UNIT
C
Description
This sets the language and units of measurement displayed on the printer's screen.
Default Setting
[MENU LANGUAGE]: ENGLISH
[LENGTH UNIT]: mm
[TEMP. UNIT]: ˚C

Drying the Trailing Edge of the Printing Area on the Dryer

Procedure
HEATER MENU
FEED FOR DRY
FEED FOR DRY
DISABLE
W 2600 mm
SETUP SHEET
Description
When this menu item is set to "ENABLE," additional media feed is performed until the trailing edge of the printing area
is positioned directly on the dryer. The margin between the print-end position and the next print-start position is fixed
at 200 mm. Any margin setting made on the computer is ignored.
When this is set to "DISABLE," media feed stops simultaneously when printing ends. This means that the trailing edge
of the printing area is not fed to the dryer unless you continue with a subsequent printing operation.
Default Setting
[FEED FOR DRY]: DISABLE
94 Chapter 4 Feature Reference
Hold down
Use
Press
Use
Press
mm
Use
ture.
C
Press
Hold down
Press
Use
ENABLE
Press
Press
Press
and switch on the sub power.
to select the display (menu) language.
.
to select the measurement unit for length.
.
to select to the measurement unit for tempera-
.
and press .
.
to select "ENABLE."
to enable the setting.
.
to go back to the original screen.