3-4 Starting and Stopping Printing
Starting Printing
Important!
Never attempt printing in any of the following situations.
When no material is loaded
When the head is not set at an appropriate position based on the surface height of the material in the case
that you do not use the head cap.
P. 36, "Loading Material Using the Adhesive Sheet," p. 41, "Loading Material Using the Center Vise"
Procedure
52
Chapter 3 Making Prints
Close the cover.
Click
The [Print] dialog box appears.
Make sure [Roland MPX-90] is
chosen as the printer name.
Click [Properties].