Table of Contents
Advertisement
Description
Setting this to "ENABLE" automatically displays [SHEET REMAIN] whenever you change the media and finish setup.
This makes it impossible to go on to the next operation unless you redo the setting for the amount remaining. This can
be useful for keeping you from forgetting to redo the setting when you change the media.
When you set this to "ENABLE," however, be sure to also set the [SHEET TYPE] menu item to "OPAQUE." When [SHEET
TYPE] is set to "CLEAR," then [SHEET REMAIN] is not displayed automatically, regardless of the setting for [AUTO
DISPLAY].
Default Setting
[AUTO DISPLAY] : DISABLE
Printing the Amount of Remaining Media
Procedure
MENU
SHEET REMAIN
SHEET REMAIN
PRINT MEMO
W 2600 mm L 25.0 m
Description
This prints the amount of media remaining that is displayed at the top menu. You use this when you want to make a
record of the remaining length of the media now in use. Printing the amount of media remaining before you change
the media enables you to refer to the printed record and use the value to make the setting for the remaining amount the
next time you use the media.
4-8 Recording the Amount of Remaining Media
Press
.
Press
.
Press
.
Press
to perform printing.
Press
.
Press
to go back to the original screen.
Chapter 4 Feature Reference
99
Advertisement
Table of Contents
