Table of Contents
Advertisement
3-7 Starting Printing
Starting Printing
Important !
Never attempt printing in any of the following situations. Doing so may damage the pins or heads.
➢ When no material is loaded
➢ When the head unit is not set at a height matched to the thickness of the material
P. 31, "Loading Material (Using the Adhesive Sheet)", p. 33, "Loading Material (Using the Center Vise)"
Procedure
–
Close the cover.
—
˜
™
40
Chapter 3 Performing Printing
Click
.
The [Print Setup] dialog box appears.
Make sure [Roland MPX-80] is cho-
sen as the printer name.
Click [Properties].
Click the [Image Correction] tab.
Select [Material].
Select either the composition or the prod-
uct code of the material.
Click [OK].
Selection of the Material
When you select the composition of the
loaded material, printing is performed
using an optimal striking force for the
composition.
P. 78, "Registering a Composition and Adjusting the
Striking Force"
Hide quick links:
Advertisement
Table of Contents
