Part Names And Functions; Printer Unit - Roland AJ-1000 User Manual

1-2 Part Names and Functions

Printer Unit

You can place a
cleaning kit here.
Cartridge Slots
This is where ink cartridges are in-
stalled. Installation is accomplished
by opening the cover.
Ethernet Connector
This is used to connect the
printer to a network.
Front Cover
Be sure to close this when you
perform printing.
Dryer
This speeds up ink-drying. It com-
prises a drying heater that warms the
media and a blower fan that blows
moving air onto the surface of the
media.
Drain Bottle
This collects drained ink and other such fluids. Discard
any collected fluid before it overflows.
Loading Lever
You operate this when you
load media.
Right Side Cover
You remove this when you perform
maintenance.
Dryer Main Power Switch
This is the main power switch for the dryer.
Printer Main Power Switch
This is the main power switch for the printer unit.
Printer Power-cord Connector
This supplies power to the printer unit and media take-up
and feed systems. A 200 to 240 V electrical outlet is required.
Dryer Power-cord Connector
This supplies power to the dryer. A 200 to 240 V electrical
outlet is required.
Operation Panel
You use this to perform various
operations.
p 27 "Operation Panel"
Chapter 1 Introduction 25