Replacing Consumable Parts; Replacing The Wipers - Roland AJ-1000 User Manual

3-4 Replacing Consumable Parts

Replacing the Wipers

TIME FOR
WIPER REPLACE
Press
CAUTION
1.
Display the [REPLACE WIPER] menu.
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE WIPER
FINISHED?
2.
Remove the right side cover.
68 Chapter 3 Maintenance and Adjustment
The wipers are components that you use when cleaning the print heads. When the
screen displays a message like the one shown, it means the item needs to be replaced.
Replace with new items.
To prevent the heads from drying out, finish this procedure in 10 minutes or
less.
A warning beep sounds after 10 minutes. At this time, stop work, attach the
right side cover, and press
ishes, restart the procedure from the beginning.
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Remove any media from the platen and close the front
cover.
Press
Press
Press
Press
Press
Press
Press
Preparations are complete when this screen appears.
Screws
Remove the right side cover.
Touch the location shown in the figure to discharge any
static electricity.
. When the head-protection operation fin-
.
several times.
.
.
.
.
.