Operation Panel - Roland AJ-1000 User Manual

Operation Panel

Display Screen
This displays various setting
menus and other information.
TEST PRINT Key
Holding this down for one
second or longer performs a
printing test.
CLEANING Key
You use this to perform
cleaning of the print heads.
MENU Key
You press this to enter the
menus for various settings.
Cursor Keys
You use these to select settings
for menu items, to move the
media, and for other such op-
erations.
Panel Notation
In this document, the keys and lights on the control panel are indicated by the following images.
SETUP Key
MENU Key
HEATER CONFIG Key
ENTER Key
PAUSE Key
TEST PRINT Key
CLEANING Key
BASE POINT Key
BUSY Light
This lights up during printing and
other such operations.
ENTER Key
You use this for such tasks
as enabling setting values.
Cursor Keys
1-2 Part Names and Functions
SETUP Key
You press this when you
load media. This lights up
when media is loaded and
the machine is ready to per-
form printing.
PAUSE Key
This pauses printing.
BASE POINT Key
You use this when you want
to set the print-start position.
This lights up when the set
has been made.
Sub Power Switch
This switches the printer on
and off. (To switch the
printer off, you hold down
the switch for one second or
longer). This flashes slowly
when the machine is in the
sleep mode.
HEATER CONFIG Key
You press this to make the
temperature setting for the
media heating system. This
flashes during warm-up, then
remains steadily lighted when
the preset temperature is
reached.
Chapter 1 Introduction 27