Specifications - Roland AJ-1000 User Manual

6-4 Specifications

Printing method
Loadable media width
Printable area
Ink Type
Colors
Resolution
Printing speed
(*1)
Distance accuracy
Roll outer diameter
Media take-up
system
Roll weight
Media feed system Roll outer diameter
Roll weight
Media dryer (*2)
Ink-fixing device (*2)
Interface
Power-saving function
Power supply Voltage and frequency
Required power capacity
Power consumption During operation
Sleep mode
Acoustic noise level During operation
During standby
Dimensions
Weight
Environment Power on
Power off
Included items
*1
At Roland PET film, print travel: 1 m
Temperature: 20˚C (68˚F), humidity: 50%
Not assured when the media heating system is used.
*2
Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.
Depending on the ambient temperature and media width, the preset temperature fail to be reached.
*3
Environment
Humidity
Temperature
AJ-1000
Piezo ink-jet method
1220 to 2641 mm (48 to 104 in.)
Maximum width: 2600 mm (102.3 in.)
Exclusive 1000-cc cartridge
6 colors (cyan, magenta, yellow, black, light-cyan, and light-magenta)
Maximum 720 dpi
Maximum approx. 45 m
Error of less than ±0.3% of distance traveled, or 0.3 mm, whichever is greater
Maximum 250 mm (9.8 in.)
Maximum 100 kg (220 lb.)
Maximum 250 mm (9.8 in.)
Maximum 100 kg (220 lb.)
Heating method (Used in combination with the blower fan), setting range
for the preset temperature: 35 to 60°C (94 to 140°F)
Preheater and print heater, setting range for the preset temperature: 30 to
50°C (86 to 122°F)
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep
Printer unit: AC 200 to 240 V ±10%, 50/60 Hz
Dryer: AC 200 to 240 V ±10%, 50/60 Hz
Printer unit: 10 A, Dryer: 10 A
Printer unit: Approx. 1600 W, Dryer: Approx. 2300 W
Approx. 60 W
70 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
4299 (W) x 1115 (D) x 1413 (H) mm (169.3 (W) x 43.9 (D) x 55.7 (H) in.)
598 kg (1319 lb.)
(*3)
Temperature: 20 to 32˚C (68 to 89.6˚F), humidity: 35 to 80% (no condensa-
tion)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no condensa-
tion)
Power cords, roll shafts, end caps, spacers, media reinforcement pipe, pa-
per pipe, drain bottle, media gauge, media clamps, hexagonal wrenches,
Head-unit tool, cleaning kit, syringe, tube, maintenance liquid cartridge,
software RIP, Roland-PrintServer CD-ROM, User's Manual, Setup Guide,
Roland-PrintServer Network Settings Guide
Use in an operating environment with this range.
2 /h
Chapter 6 Specifications 123