Changing The Ink-Drying Method; Switching Off The Print Heater And Dryer; Determining How The Media Heating System Operates - Roland VersaART RS-640 User Manual

4-7 Changing the Ink-drying Method

Switching Off the Print Heater and Dryer

Procedure

FUNCTION
HEATER CONFIG

HEATER CONFIG
DRYER 34 C
Current temperature
of the dryer

DRYER
35 C OFF
Current preset temperature

W1200mm
SETUP SHEET
Description
This menu is used to make the temperature settings for the print heater and dryer, and you can also use it to turn these off.
When set to "OFF," the print heater and dryer do not operate at all.
Note, however, that you can also make this setting on the computer. When you have made the setting on the computer, the
computer's setting is used and the printer's setting is ignored.
Default Setting
[PRINT] (print heater) : 35°C (94°F)
[DRYER] (dryer) : 40°C (104°F)

Determining How the Media Heating System Operates

Procedure

MENU
HEATER MENU

HEATER MENU
PREHEATING

PREHEATING
30 C MENU
Press .
Press several times.
Press .
Use to select [PRINT] (print heater) or [DRYER]
(dryer).
Press .
Use to select "OFF."
Press to enable the setting.
Press to go back to the original screen.
Press .
Press several times.
Press .
Press .
Press .
Use to make the setting.
Press to enable the setting.
Chapter 4 Feature Reference 83