Table of Contents
Advertisement
Printing Tests and Cleaning
Before you carry out actual printing, we recommend performing a printing test to ensure no dot drop-out occurs. If dot
drop-out occurs, perform cleaning.
How to Perform a Printing Test
FUNCTION
CLEANING
CLEANING
TEST PRINT
How to Perform Cleaning
FUNCTION
CLEANING
CLEANING
NORMAL
CLEANING...
>>
CLEANING
NORMAL
W1200mm
SETUP SHEET
Perform a printing test again to make sure the dot drop-out has been corrected.
If the problem persists, try performing cleaning a second time.
If the problem doesn't go away even after performing cleaning two or three times, then try cleaning using a different
method.
P. 49, "When Head Cleaning Is Not Effective"
Press
.
Press
.
Dot drop-out
Press
.
Press
.
Press
.
Press
.
Cleaning starts.
When it finishes, the screen shown in the figure appears again.
Press
to go back to the original screen.
2-4 Starting Printing
Press
.
A test pattern is printed.
You can freely set the location for printing the test
pattern.
P. 63, "Setting the Printing Position and Margins"
Chapter 2 Operation
41
Advertisement
Table of Contents
