Table of Contents
Advertisement
4-3 Saving the Printer Settings to Match the Media
Loading a Saved Preset
Procedure
MENU
PRESET
LOAD
NAME1
SETUP SHEET
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned, you select from
among NAME1 through NAME8.) If you load a preset while
the loading lever, make sure the media is loaded straight, then lower the loading lever again to make printing possible.
Assigning a Name to a Preset
Procedure
PRESET
NAME
NAME
NAME1
NAME
S_
NAME
SAMPLE_
W1200mm
SETUP SHEET
Description
This assigns a name to a saved preset. Using media names may aid recognition and clarity.
The characters you can enter are "A" through "Z," "0" through "9," and the "-" character. You can enter up to 15 characters,
including spaces.
66
Chapter 4 Feature Reference
Press
.
Press
twice.
Press
load.
Press
to load.
The settings are changed and the screen shown in the figure appears.
Press
.
Press
.
Press
twice.
Press
.
Use
to select any one from NAME1 to NAME8.
Press
.
Use
to enter a character.
Press
.
Use
to enter the next character.
Enter the following characters in the same way. When you're fin-
ished entering text, press
Press
to go back to the original screen.
to select the name of a preset you want to
is illuminated,
goes dark. If this happens, raise
.
Advertisement
Table of Contents
