Table of Contents
Advertisement
4-5 Accommodating Various Kinds of Media
Preventing Media from Coming Loose
Procedure
MENU
SUB MENU
SUB MENU
VACUUM POWER
VACUUM POWER
AUTO
W1200mm
SETUP SHEET
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen because it is warped
or wrinkled, increasing the suction force may help correct the problem. Conversely, when the media is flimsy and cannot
move smoothly, reducing the suction force may help.
When set to "AUTO," the suction force is automatically adjusted to the optimal level for the media width.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's setting
is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
76
Chapter 4 Feature Reference
Press
Press
Press
Press
Press
Use
90%
Press
Press
.
several times.
.
several times.
.
to set the value.
to enable the setting.
to go back to the original screen.
Advertisement
Table of Contents
