Table of Contents
Advertisement
4-2 Setting the Printing Position and Margins
FUNCTION
BASE POINT
Press
Description
You can shift the printing position to the left by using
for each individual page. When the printing of one page finishes, the left-right positioning returns to its default value. When
the position has been set,
also available when printing various test patterns, and can help you use media with less waste. Note, however, that the left
and right positions are not restored to their defaults for test patterns.
Expanding the Printing Area by Reducing the Margins
Procedure
MENU
SUB MENU
SIDE MARGIN
10 mm
W1200mm
Description
This makes the setting for distance from the left or right media clamp to the corresponding left or right edge of the printing
area. You can select either "5 mm", "10 mm," or "25 mm." Setting this to "5 mm" lets you expand the printing area.
P. 111 "Printable Area and Margins"
Note, however, that when you're using transparent media, setting this to "5 mm" may result in printing on top of the media
clamps.
Default Setting
[SIDE MARGIN]: 10 mm
64
Chapter 4 Feature Reference
Press
.
lights up and the screen displays the printable width at the set position. This feature is
Press
Press
Press
Press
Press
Use
5 mm
Press
Press
.
. Note, however that this setting must be made
.
several times.
several times.
.
to select [5mm].
to enable the setting.
to go back to the original screen.
Advertisement
Table of Contents
