Performing Feed Correction to Alleviate Horizontal Bands and the Like
Procedure
1.
Print a test pattern.
MENU
CALIBRATION
CALIBRATION
TEST PRINT
2.
Check the test pattern you printed.
Gap present
3.
Enter the correction value.
SETTING
0.00%
-0.40%
4.
Go back to the original screen.
W1200mm
4-4 Optimizing Printing to Match Media Thickness
Press
.
Press
several times.
Press
.
Press
to start printing.
Current correction
value
Press
.
Press
.
Use
to make the setting for the correction value.
Press
to enable the setting.
Press
to go back to the original screen.
Choose the one that
has the smallest gap
and the least amount
of overlap.
Chapter 4 Feature Reference
Overlap
71