1-2 Part Names and Functions
Printer Unit
Loading lever
You operate this when you
load media.
Maintenance cover
You remove this when
you perform cleaning the
print head.
Status LED
This flashes yellow while data is being
received from the network.
Link LED
This lights up green when the con-
nection to the network is correct.
Connector
This is employed when you're
us ing the media take-up system
available separately.
Side cover
Front cover
You remove this when you
Be sure to close this when
perform maintenance.
you perform printing.
Media holders
Here is where you load roll media
and secure it in place.
Operation panel
You use this to perform vari-
ous operations.
P. 27, "Operation Panel"
Drain bottle
This collects drained ink
and other such fluids. Dis-
card any collected fluid
before it overflows.
Main power switch
Power-cord connector
This supplies power to the printer.
Ethernet connector
This is used to connect the print-
er to a network.
Cartridge slots
There are where ink car-
tridges are installed.
Chapter 1 Introduction
25