Method For Switching The Ink Type - Roland LEC-300 Supplemental Manual

Method for Switching the Ink Type

1. Draining Ink Remaining Inside the Unit
Important
Insert each color ink cartridge into the slot labeled with the matching color . If you insert the wrong cartridges, the color inks
may be mixed . Be careful not to insert the wrong cartridges . Contact your authorized Roland DG Corp . dealer or us, if you
inserted the wrong cartridges and the color inks were mixed .
1.
Press .
2.
Press several times until the screen shown below appears .
MENU
SUB MENU
3.
Press .
4.
Press several times until the screen shown below appears .
SUB MENU
INK CONTROL
5.
Press
INK CONTROL
PUMP UP
6.
Press .
7.
Thereafter, follow the on-screen instructions to carry out the operations .
After cleaning has finished, the sub power is automatically switched off .
memo
The error message "CANCELED FOR MOTOR PROTECTION" may display to prevent damage to the machine due to the
overheating of pump motor .
In this case, allow the machine to stand for approximately 10 minutes before resuming operation .
Press any key other than the sub power switch to cancel the error message .
in this order until the screen shown below appears .
Switching the Ink Type
2. Changes to the User's Manual
23