Specifications - Roland VersaART RS-640 User Manual

6-4 Specifications

Printing technology
Media Width
Thickness
Roll outer diameter
Roll weight (*1)
Core diameter
Printing width (*2)
Ink cartridges Types
Colors
Printing resolution (dots per inch)
Distance accuracy (*3) (*4)
Media heating system (*5)
Connectivity
Power-saving function
Power requirements
Power During operation
Sleep mode
Acoustic noise During operation
level
During standby
Dimensions (with stand) (*6)
Weight (with stand)
Environmental Power on (*7)
Power off
Accessories
*1
When the take-up unit is used, conditions are dependent on the usable media of the take-up unit.
*2
The length of printing is subject to the limitations of the program.
*3
○
With Roland PET film, print travel: 1 m
○
Temperature: 25°C (77°F), humidity: 50%
*4
Not assured when the print heater or dryer is used.
*5
○
Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
○
Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*6
○
Depth when the included ink-cartridge tray is installed is 1,000 mm.
*7
○
Operating environment
114 Chapter 6 Specifications
259 to 1,371 mm (10.2 to 54 in.)
Maximum 30 kg (66 lb.)
Maximum 1,361 mm (53.6 in.)
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Print heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F)
Dryer, setting range for the preset temperature: 30 to 50°C (86 to 122°F)
AC 100 to 120 V ±10%, 7.6 A, 50/60
Hz or AC 220 to 240 V ±10%, 3.9 A,
63 dB or less (according to ISO 7779)
44 dB or less (according to ISO 7779)
2,310 (W) x 740 (D) x 1,103 (H) mm
(90.9 (W) x 29.1 (D) x 43.4 (H) in.)
Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), hu-
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-condensing)
Exclusive stands, power cord, media clamps, media flanges, replacement blade
for separating knife, cleaning kit, software RIP, User's Manual, etc.
Use in an operating environment with this range.
RS-540
Piezoelectric inkjet
Maximum 1.0 mm (39 mil) with liner
Maximum 210 mm (8.3 in.)
50.8 mm (2 in.) or 76.2 mm (3 in.)
ECO-SOL MAX 220-cc cartridge / 440-cc cartridge
Four colors (cyan, magenta, yellow, and black)
Maximum 1,440 dpi
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep feature
50/60 Hz
Approx. 1020 W
Approx. 16 W
122 kg (269 lb.)
midity: 35 to 80%RH (non-condensing)
RS-640
259 to 1625 mm (10.2 to 64 in.)
Maximum 40 kg (88 lb.)
Maximum 1615 mm (63.6 in.)
AC 100 to 120 V ±10%, 7.8 A, 50/60
Hz or AC 220 to 240 V ±10%, 4.0 A,
50/60 Hz
Approx. 1030 W
Approx. 16 W
63 dB or less (according to ISO 7779)
44 dB or less (according to ISO 7779)
2,570 (W) x 740 (D) x 1,103 (H) mm
(101.2 (W) x 29.1 (D) x 43.4 (H) in.)
133 kg (293 lb.)