Table of Contents
Advertisement
3-2 When Head Cleaning Is Not Effective
Performing More Powerful Cleaning
When the problems such as dot drop-out are not cleared up by the "normal cleaning," try the more forceful "medium clean-
ing" or the even more forceful "powerful cleaning." Note, however, that this consumes more ink than "normal cleaning," and
too-frequent use may damage the print heads themselves. Avoid using it more than necessary.
1.
Choose "medium cleaning" or "powerful cleaning."
FUNCTION
CLEANING
CLEANING
MEDIUM CL.
2.
Start cleaning.
Press
.
CLEANING...
>>
CLEANING
MEDIUM CL.
CHECK
DRAIN BOTTLE
Check the drain bottle.
If the amount of discharged fluid is near the upper-limit line, then remove the bottle, discard
the collected fluid, and reattach the bottle.
P. 46, "Disposing of Discharged Ink," step
CLEANING...
>>
CLEANING
POWERFUL CL.
W1200mm
SETUP SHEET
When Powerful Cleaning Is Not Effective
If problems such as dot drop-out persist even after you have performed powerful cleaning several times, then use the clean-
ing kit to clean the heads. Such cleaning can be effective when carried out periodically, according to the frequency of use.
P. 50, "Cleaning the Heads Using the Cleaning Kit"
Press
.
Press
several times.
Press
.
Press
to choose "MEDIUM CL." or "POWERFUL
CL."
If You Chose "MEDIUM CL."
The screen shown in the figure appears, then cleaning starts.
When it finishes, the screen shown in the figure appears. Go on to Step
If You Chose "POWERFUL CL."
The screen shown in the figure appears. Go on to Step
2.
Press
.
The screen shown in the figure appears, then cleaning starts.
When it finishes, the screen shown in the figure appears again. Go on to Step
Press
to go back to the original screen.
.
Chapter 3 Maintenance and Adjustment
.
.
49
Advertisement
Table of Contents
