Table of Contents
Advertisement
4-9 Viewing Information about the Media and the System
Displaying the Amount of Media Remaining
Procedure
MENU
SHEET REMAIN
SHEET REMAIN
SET LENGTH
SET LENGTH
0.0 m
W1200 mm
This display is updated.
SETUP SHEET
If setup has not been
performed, the set
value flashes.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount remaining is
displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media or raising the loading
lever, the amount remaining at that time flashes on the screen. The amount of media remaining is not updated automatically
when you change the media. Redo the setting whenever you change the media.
You can also make the setting display this menu automatically whenever you change the media. See the next section, "Verify-
ing the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
Verifying the Setting for the Amount Remaining Every Time the Media Is Changed
Procedure
MENU
SHEET REMAIN
SHHET REMAIN
AUTO DISPLAY
86
Chapter 4 Feature Reference
Press
Press
Press
Press
Press
Use
25.0 m
Press
Press
L 25.0 m
L 25.0 m
Press
Press
Press
Press
.
.
.
.
.
to set the amount of media remaining.
to enable the setting.
to go back to the original screen.
.
.
.
twice.
Advertisement
Table of Contents
