Step 4: Printing Tests And Normal Cleaning After Daily Operations - Roland VersaUV LEF-12 First Step Manual


FINISHED PRINT
W : mm L :
H : mm

STEP 4: Printing Tests and Normal Cleaning After Daily Operations

Make sure to check for dot drop-out by performing printing tests after daily operations. If dot drop-out is
present, perform normal cleaning.
 P. 42, "STEP 2: Test Print and Normal Cleaning"
If problems such as dot drop-out persist even after you have performed normal cleaning several times, then
perform medium or powerful cleaning.
 "Periodic Cleaning Maintenance" in Master Guide.
Click
Start printing.
When the printing ends, the screen shown in the figure appears on the
control panel. Data from the computer is not accepted while this screen
is displayed.
(NOTE: If "PRT CONTINUE" is set to "ENABLE", the screen shown in the figure
does not appear. For more information, see "Continuously Outputting Print
Data" in the Master Guide.)
To allow it to accept data from the computer, press
mm
to the screen shown in the figure.
.
First Time Printing
to go back
49