Maintenance That Must Be Performed Daily
Printing Tests and Normal Cleaning
• Be sure to perform a printing test before daily operations to check whether normal cleaning is necessary.
• If dot drop-out or dot displacement is present after refreshing the heads and performing a printing test, per-
form normal cleaning.
1.
Set the machine so that the print area is set each time the media is set up.
Prevent printing in the incorrect position by specifying the print area each time before setting up the object to be
printed on.
MEMO
To print in the same position repeatedly, specify "DISABLE" for this setting.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] twice to display the screen shown below.
SET AT SETUP
DISABLE DISABLE
4.
Press [▲] or [▼] to select "ENABLE".
SET AT SETUP
DISABLE ENABLE
5.
Press [ENTER] to confirm your entry.
156
2. Regular Maintenance