Printing Tests And Normal Cleaning - Roland VersaUV LEC2-300 User Manual

Preparations before Printing Output

Printing Tests and Normal Cleaning

1.
Perform a printing test.
Before you carry out actual printing, perform a printing test to ensure no dot drop-out or dot displacement occurs.
If dot drop-out or dot displacement occurs, perform cleaning of the print heads (normal cleaning).
MEMO
• This operation is unnecessary if you will only perform cutting.
• When performing printing tests successively, you can select "FEED" (vertical printing) or "SCAN" (horizontal printing) as the print
position for the 2nd and later tests in comparison to the 1st test.
P. 170「Performing Printing Tests Arranged Horizontally」
Procedure
1.
Load the media.
P. 27「Setup of Media」
2.
Press [FUNCTION].
3.
Press [▼], then [▶] to display the screen shown below.
CLEANING
TEST PRINT
4.
Press [ENTER].
Printing of the test pattern starts.
5.
Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
6.
If you have opened the front cover, close it.
If no dot drop-out or dot displacement occurs, this operation is finished. Press [FUNCTION] to go back to the
original screen.
54
1. Printing Method