Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.19
7.20
32
Display mode SPEED/A1 (average speed 1)
400325-01
Display mode SPEED/A2 (average speed 2)
400326-01
Info
The TR2 value can also be corrected manually during the
journey with the button
If 999.9 is exceeded, the value of TR2 is automatically
reset to 0.0.
Press the but-
Increases value of TR2.
ton
for 2–3
seconds.
Briefly press
Increases value of TR2.
the button
.
Press the but-
Reduces value of TR2.
ton
for 2–3
seconds.
Briefly press
Reduces value of TR2.
the button
.
Wait 10 - 12
Stores and closes the Setup menu.
seconds.
–
Repeatedly press the button
top right of the display.
A1 (average speed 1) shows the average speed calculated using
TR1 (trip master 1) and S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the
wheel speed sensor and ends 3 seconds after the last impulse.
Press the but-
Displays of TR1, A1 and S1 are reset to 0.0.
ton
for 2–3
seconds.
Briefly press
Next display mode
the button
.
Press the but-
No function
ton
for 2–3
seconds.
Briefly press
No function
the button
.
–
Repeatedly press the button
top right of the display.
A2 (average speed 2) shows the average speed on the basis of the
current speed if the stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average
speed if S2 was not stopped after the ride.
Briefly press
Next display mode
the button
.
Press the but-
No function
ton
for 2–3
seconds.
and the button
.
briefly until A1 appears at the
briefly until A2 appears at the
Advertisement
Table of Contents
