7) Installation Instructions (Mortise)
7.3) Install Mortise Lock
1.
Feed Solenoid wire from Mortise Lock into Mortise cavity and up
through the 1/2 diameter hole "C".
2.
While sliding Mortise Case into door prep, pull the Solenoid wire from the Mortise
Case out through "C" so that this wire does not get trapped behind the Mortise Case
3. Slide Mortise Lock into door and loosely fasten with (2) flat head combination screws.
Inside
of Door
8 Pin
Molex
Doorwire
2 Pin
Molex
REX
2 Pin
Methode
Solenoid
"C"
14
Mortise Lock
(2) #12x1" long flat
head combination
screw.