Table of Contents
Advertisement
TL3700 Series
Tubular Lockset
Installation Instructions
4
Latch, Lock, and Trim
a
Latch Installation
The threaded hole on locking piece
must be to the inside of the door,
so the Push Button (Detail #12)
can be threaded into it. (Figure 5)
b
Lock and Trim Installation
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1
Note: TL3720
IMPORTANT
Test for proper
operation before
closing door.
Mounting Post Screws
(2) #6 x 3/4"
Align studs on rose with bushings on
spring housing. Push on rose to install.
(Figure 6)
Note: Rose to be removed
with a flat head screwdriver at notch.
Install first for fire
rated option only.
Install loosely;
tighten after step #2
Screws (2)
#8-32 x 3/4"
Figure 5
Rose
Figure 6
5
FM271 11/19
Advertisement
Table of Contents
