Table of Contents
Advertisement
7) Operational Check (Rim, SecureBolt™, and Mortise)
1. For exit devices without cylinder override trims, go to Step 4 below.
2. For Rim and SecureBolt exit devices with 9803 Series cylinder override trims:
a. Insert key into cylinder and rotate.
b. While holding key in rotated position, operate outside lever to retract latch.
c. Key should rotate freely and outside lever should retract latch.
3. For Mortise exit devices with 9M805 Series cylinder override trims:
a. Insert key into cylinder and rotate.
b. Key should rotate freely and retract latch.
4. Depress exit device pushpad to retract latch.
C A U T I O N
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
TEST
FOR PROPER
OPERATION
BEFORE
CLOSING
DOOR
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037-4004
www.corbinrusswin.com
END OF INSTALLATION INSTRUCTIONS
Technical Product Support:
Corbin Russwin, Inc.
Phone 800-810-WIRE (9493)
Canada:
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, ON L4K 4TG
www.assaabloycanadadss.ca
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express
written permission of Corbin Russwin, Inc. is prohibited.
20
Copyright © 2008 Corbin Russwin, Inc.,
Advertisement
Table of Contents
