Table of Contents
Advertisement
6) Installation Instructions (Rim and SecureBolt™)
6.5) Installation of Outside Keypad Escutcheon
1. For exterior door applications, it is recommended that the gaskets provided
be applied as shown. The gaskets may be used as a seal between the escutcheon
and the door surfaces.
2a. For fire rated devices, feed keypad ribbon cable/connector and ground wire from
outside of door through fire stop plate and hole in door.
2b. For non fire rated exit devices, feed keypad ribbon cable/connector and ground wire
through the door.
3.
Place escutcheon against door surface.
GASKET APPLICATION:
Peel off the adhesive protective paper from
gasket. Feed Keypad ribbon cable and ground
wire through gasket opening as shown and firmly
press gasket to escutcheon, aligning edge of
gasket with the edge of the escutcheon.
Keypad Ribbon Cable
Outside
Of
Door
Ground Wire
9
Fire Stop Plate
Advertisement
Table of Contents
