Subscribe to Our Youtube Channel
Related Manuals for Assa Abloy Medeco XT
Summary of Contents for Assa Abloy Medeco XT
- Page 1 ® XT Safe Lock Installation Guide Including Guides for Configuring & Using the XT Safe Lock...
- Page 2 FCC/CE Compliance Statement Medeco XT Safe Lock Models EA-100206, EA-100207, and EA-100208 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any...
-
Page 3: Table Of Contents
Installation – Dead Bolt & Spring Bolt Lock Configurations ..................... 12 Installation – Swing, Dead & Spring Bolt Lock Configurations ..................16 XT Safe Lock Mounting Information for New Installations ....................22 Features of your Medeco XT Safe Lock ............................ 23 Functional Modes Summary ..............................23 Normal Mode ....................................24 Time Delay (1, 2, 3, or 5 Minute) Mode .......................... -
Page 4: Introduction
Introduction Information Warnings Tips About Your Product Box – QR Codes... -
Page 5: What Is Included In The Box
What is Included in the Box? Part Name Part Number Part Name Part Number Assembly Part Number... -
Page 6: What Tools Are Needed
What Tools are Needed? Before you Begin... -
Page 7: Xt Safe Lock - Configuration Setting Label & Security Seal
XT Safe Lock - Configuration Setting Label & Security Seal... -
Page 8: Setting The Functional Mode Selection
Setting the Functional Mode Selection... -
Page 9: Mode Options & Switch Settings
Mode Options & Switch Settings Mode Options Switch Settings 1 off, 2 off, 3 off, 4 off Factory Default Settings Normal Standard Access 1 on, 2 on, 3 on, 4 on Normal Standard Access with Time Delay • 1 on, 2 on, 3 on, 4 off 5 minute delay •... -
Page 10: Applying The Security Seal
Applying the Security Seal... -
Page 11: Installation Type
Installation Type Installation – All Lock Bolt Configurations Installation – Swing, Dead & Spring Bolt Lock Configurations Installation – Dead Bolt or Spring Bolt Lock Configurations Installation – All Lock Bolt Configurations... -
Page 12: Installation - Dead Bolt & Spring Bolt Lock Configurations
Installation – Dead Bolt & Spring Bolt Lock Configurations –... - Page 14 –...
-
Page 16: Installation - Swing, Dead & Spring Bolt Lock Configurations
Installation – Swing, Dead & Spring Bolt Lock Configurations –... - Page 18 Polarity indicator (-) Polarity indicator (+)
- Page 20 –...
-
Page 22: Xt Safe Lock Mounting Information For New Installations
XT Safe Lock Mounting Information for New Installations SPINDLE (DRIVE SHAFT) & CABLE HOLE DRILL THRU HOLE DRILL & TAP 0.406” TO 0.438” #8 – 32 x 0.375” TAP DEPTH EDGES OF HOLE MUST BE (0.25” TAP DEPTH MIN.) SMOOTH AND FREE OF BURRS 2 PLACES AS REQUIRED DRILL &... -
Page 23: Features Of Your Medeco Xt Safe Lock
Features of your Medeco XT Safe Lock Functional Modes Summary ... -
Page 24: Normal Mode
Normal Mode... -
Page 25: Time Delay (1, 2, 3, Or 5 Minute) Mode
Time Delay (1, 2, 3, or 5 Minute) Mode... -
Page 27: Dual Authentication Mode
Dual Authentication Mode... -
Page 28: Xt Reader Battery Maintenance
XT Reader Battery Maintenance... -
Page 29: Contacting Medeco
Contacting Medeco...
Need help?
Do you have a question about the Medeco XT and is the answer not in the manual?
Questions and answers